Media

Angels vs マリナズ

Saturday, July 17th, 2010

Adding a bluetooth audio input to my car stereo for <$15. Phase 1: research and experimentation.

Friday, July 9th, 2010
The stereo in my friend’s 2010 Prius 1 has a very useful feature: bluetooth audio input. As soon as he steps inside his car, his iPhone connects to the stereo wirelessly, and he can then play music from its library or using Pandora without connecting any cables.

The BCK-08 device.
I noticed that DealExtreme sells a bluetooth stereo music receiver for $12.99 2. This tiny, battery-operated device looks like an ugly cousin of an old iPod shuffle, sporting a big bluetooth symbol in the middle of its control pad. It’s designed to accept wireless transmissions from your iPhone, computer, or other device that supports bluetooth audio streaming, and then play that received audio out headphones connected to its jack. $12.99 falls well within my speculative hacking budget.

So I bought the device and have tested it out. When I plugged a cable between its headphone jack and my car’s audio input jack and streamed audio to it from my iPhone, it worked a treat. It shows up in the iPhone’s bluetooth menu as a device named,”BCK-08″.

There are a few problems. The device’s built-in battery is pathetic, and within an hour or two of use it begins to beep every few minutes to indicate that the battery needs a charge. I also think the audio quality decreases in direct proportion to the battery’s charge, but am not positive about that.

My goal is to take apart this device, wire it to be powered directly from my car, and leave it permanently connected to the car stereo’s auxiliary input jack.

I’ve found a few resources on the net that may be of help:

  1. I’m sure many other cars also have this feature. ↩︎
  2. The device’s full name on DealExtreme’s site is “Bluetooth 2.0 A2DP AVRCP Stereo Music Receiver and Handsfree (Black)” ↩︎
  3. I’ve been out of China for 3 years now and don’t feel like spending an hour fighting my way through the website with a dictionary in hand ↩︎
  4. Also from DealExtreme –how about that? ↩︎

Photo: Hawaiian Green Sea Turtle on a black sand beach

Tuesday, July 6th, 2010


From a recent trip to Kona. I’ll post a link to the rest of the photos on Flickr as soon as I finish editing them.

Jay Leno in his daytime, Coldwater Canyon slot

Saturday, July 3rd, 2010
Jay Leno driving along Coldwater Canyon
Click either photo to see it full-size.
Rachel and I were driving along Coldwater Canyon Blvd in Studio City this morning when we spotted something that’s a not-infrequent sight around here: Jay Leno driving one of his very cool vintage cars down the road.

I grabbed her cell phone 1 and snapped a couple of pictures. He did the same. I don’t think he has a blog in which he posts photos of people in the act of taking his picture 2, but if he does you’ll now be able to find a photo of me on it.

Jay Leno driving a vintage car

  1. It’s an iPhone 4G. I’m pretty impressed by its camera’s image quality. I don’t think I gave the phone enough time to properly set its exposure for that 2nd shot, there’s likely have been better highlight detail had I waited a couple of seconds. ↩︎
  2. which is something I’d definitely do if I were any sort of celebrity ↩︎

Where’s Chow? Aperture 3 facial recognition in action.

Thursday, June 3rd, 2010

Where's Chow
I thought this screenshot might amuse. Click the photo to see it at full-size. At the top of the image are photos that include Chow Yun Fat, cropped to just the automatically recognized face. Below a line are photos that Aperture 3 thinks may be the same person. To refine the computer’s idea of what his face looks like and tag more photos with the appropriate name I had to select all Chow Yun Fat photos from the bottom part of the screen and drag them to the top, above the line.

For more info on the facial recognition feature in Aperture 3, check here on Apple’s website.

I have about 16,000 photos in my archive, and though the process isn’t completely automatic, the facial recognition feature made it much more feasible to tag all the people in these photos. Even just the fact that the application can display an entire set of photos cropped and resized to only show faces alone would be a huge help, the fact that Aperture 3 makes decent guesses is a bonus.

The official iPhone Twitter client’s “Nearby” feature is scary-neato

Wednesday, May 19th, 2010
Nearby tweets overlaid on a map

Accessing Iphone Twitter Nearby Feature-1
Click this image to pop up a full-sized explanation of how to find the "Nearby" feature in the new iPhone Twitter app.

5/19/2010 4:43pm Edit: I’ve been told this feature was in the previous version of the app. I just never happened across it

The official iPhone Twitter client is finally up in the app store, today, now. The app,”Twitter”, is actually version 3 of what used to be called “Tweetie”. Twitter bought Tweetie, and what was previously an excellent commercial app is now free and improved.

The “Nearby” feature of Tweetie v2, which showed a list of nearby recent tweets, has been updated for v3. It’s more difficult to find this feature in the new version of the app, as it is accessed via an unlabeled button, but it’s there and has been significantly upgraded. Now one can see not just a list of nearby tweets, but tweets in any area, overlaid on a Google map.

On the one hand, I’m all about openness, and it seems pretty cool to be able to see what people in a given area are tweeting, overlaid on a map.

On the other hand, the ease with which any of us iPhone Twitter users 1 can now be tracked down by stalkers, paparazzi, their mothers, and other ne’er-do-wells is a little scary.

Change. Scary and neato, at the same time.

  1. iPhone Twitter users who opt-in for the app’s location feature when asked, that is. ↩︎

The motorized mixing control surface of the future, on iPad

Saturday, May 15th, 2010

When doing sound mixes, film/video editors often make use of hardware control surfaces like the Mackie Control Universal Pro. Such mixers connect to the editing system via MIDI.
Euphonix Mc Mix
Euphonix’s "MC Mix" hardware control surface. A nice piece of kit, costs $999. It’s a little smaller than the Mackie Universal Controller, a plus in my opinion.
The editor slides the faders on these fancy control surfaces to adjust the volume for each of the edit’s audio tracks during playback. When the editor is not moving the faders, motors built into the control surface move them to match the edit’s pre-existing settings. The automatic movement of the faders can seem a little like something from Poltergeist.

Unfortunately, the motorized movement of these faders can also be noisy, especially the clacking sounds emitted as many faders pop into position at once. This can be distracting when trying to mix a quiet, emotional scene. These controllers are also pretty expensive, starting at about $1000.

Enter the iPad and Saitara Software’s “AC-7 Pro Control Surface”:

(problems with the embedded video above? try this direct link)

The control surface in the video looks very cool to me. It’s silent, can be seen in a dark editing room, appears to function as well as I’d need, and the cost of the app is only $9.99. I’ve played with a friend’s iPad, and know the touch-sensitivity of that screen is accurate and responsive enough that I’d have no problem adjusting several tracks at once with this interface. For those addicted to the feel of hardware faders this might not cut it 1, but for me it’d be a big improvement over moving the faders in Final Cut Pro’s “Audio Mixer” window with a mouse. I can’t justify spending $1200 on a set of faders I’d barely touch except a bit towards the end of a project, but $10 2 ? Hmm.

Ac-7 Pro

Yet another reason to consider an iPad. I wonder how long I’ll hold out? Sigh.

  1. I don’t think this is just a matter of purely subjective preference –one can feel where a hardware fader’s control is in space, and there’s probably a bit of resistance built in so the user can feel when the level has been set at unity without having to look. ↩︎
  2. $510 if factoring in the cost of an iPad, which can also be used to access the iPoo social network. ↩︎

Test of NeatVideo plugin; Noise removal from Canon T2i 6400 ISO clips

Friday, April 16th, 2010

Test of NeatVideo plugin; Noise removal from Canon T2i 6400 ISO clips from ZachFine on Vimeo.

if you’re on a fast machine, I’d recommend watching this full-screen with HD set to “on” –if you’d like to download the original QuickTime file rather than watch it embedded in a web page, there’s a download link low on the right side of the movie’s Vimeo page.

I shot some 1080p video in low-light with my Canon Digital Rebel T2i set to its 6400ISO setting, which resulted in very noisy video.

I tested the demo version of the NeatVideo for FCP filter to see if it could remove or minimize the noise. The results were encouraging, so I bought the “Pro” version of the plugin for $99.

This clip shows the results of the application of this filter to a couple of my more dramatically noisy clips. The filter renders very slowly, compounded by the fact that I’ve set the temporal filtration to use 3 frames.

You’ll see portions of the clips both with and without the noise removal, and split-screened sections for comparison. I think the result is pretty remarkable and usable, though the noise is peeking through the darker areas of the frame in the first clip. I wonder if I can smooth that out if I build a better noise profile or if I increase the temporal filtration?

Music:
“Do The Global Twist” by “The Neatbeats”, from the awesome album “japanese groupsound”.

I had to chop the song in half. Go buy the song or album to hear the very enthusiastic jam session in the middle of the track. Fun stuff.

Looong Steadicam Merlin + Canon T2i shot

Sunday, April 4th, 2010

Looong Steadicam Merlin + Canon T2i shot from ZachFine on Vimeo.

This is not the most exciting shot in the world to watch, but it was for me the most successful of my increasingly steady pairing of a Steadicam Merlin
with Canon EOS Rebel T2i
and Rode VideoMic
.

In order to stop down the kit lens‘s aperture enough to achieve anything approaching deep focus in the relatively dark location, I had to shoot at the camera’s 6400 ISO setting. My next big purchase will probably be a fast superwide zoom, maybe the Tokina 11-16mm f2.8
. My Canon 20mm f2.8
is just not wide enough –it’s the equivalent of a 36mm field of view on these APS-C sized sensors.

The steadicam was balanced so that it was just barely bottom heavy. About a 4-5 second drop (when the contraption is swiveled so that the camera and the counterweight are both level in front of me, it takes the camera about 5 seconds to float back upright). I enjoyed working with it so balanced.

The terrain was a little tricky. I had to weave around furniture, adults, and running little kids. It’s not the smoothest path I could have carved through the space, but I’m pleased with the improvisation. Around 45 seconds the camera tilted a bit, probably after I ran into something. I tried to tip it back.

The Rode Videomic is just directional enough to isolate bits of conversation in front of the camera. I can clearly hear my cousin Bruce explaining the intricacies of the game “Risk” and my Uncle Bob talking about a play he’d seen called “The Whipping Man
” as the camera passes each of them.

I applied a very temporary color correction with Final Cut Pro‘s 3-way color corrector filter, and applied very sophisticated titles and transitions, and exported to 1080p H264 using Compressor before uploading. Yay.

If it looks stuttery, try toggling “HD” to “off”.

How to use an iPod. A demonstration by Ari and Mirra.

Friday, April 2nd, 2010
1-3
I don’t hear anything. Is this thing on?
3
Ahhhhh. I hear something. Prog rock?