Adding a bluetooth audio input to my car stereo for <$15. Phase 1: research and experimentation.

The stereo in my friend’s 2010 Prius 1 has a very useful feature: bluetooth audio input. As soon as he steps inside his car, his iPhone connects to the stereo wirelessly, and he can then play music from its library or using Pandora without connecting any cables.

The BCK-08 device.
I noticed that DealExtreme sells a bluetooth stereo music receiver for $12.99 2. This tiny, battery-operated device looks like an ugly cousin of an old iPod shuffle, sporting a big bluetooth symbol in the middle of its control pad. It’s designed to accept wireless transmissions from your iPhone, computer, or other device that supports bluetooth audio streaming, and then play that received audio out headphones connected to its jack. $12.99 falls well within my speculative hacking budget.

So I bought the device and have tested it out. When I plugged a cable between its headphone jack and my car’s audio input jack and streamed audio to it from my iPhone, it worked a treat. It shows up in the iPhone’s bluetooth menu as a device named,”BCK-08″.

There are a few problems. The device’s built-in battery is pathetic, and within an hour or two of use it begins to beep every few minutes to indicate that the battery needs a charge. I also think the audio quality decreases in direct proportion to the battery’s charge, but am not positive about that.

My goal is to take apart this device, wire it to be powered directly from my car, and leave it permanently connected to the car stereo’s auxiliary input jack.

I’ve found a few resources on the net that may be of help:

  1. I’m sure many other cars also have this feature. ↩︎
  2. The device’s full name on DealExtreme’s site is “Bluetooth 2.0 A2DP AVRCP Stereo Music Receiver and Handsfree (Black)” ↩︎
  3. I’ve been out of China for 3 years now and don’t feel like spending an hour fighting my way through the website with a dictionary in hand ↩︎
  4. Also from DealExtreme –how about that? ↩︎

3 Responses to 'Adding a bluetooth audio input to my car stereo for <$15. Phase 1: research and experimentation.'

  1. Paul Says:

    Neat project! I can’t find anything available and have pretty much the same application in mind. Did you get anywhere with this?

  2. zach Says:

    Haven’t put any time into it I’m afraid, and got hired away to work on a film in China –which means I have even less time and am thousands of miles from my car.

    I did just have a relevant thought though. Maybe I could take a 5V-3.3V tty converter I’ve got and use it to pull down 5V from a cigarette lighter USB adapter to 3.3 for the device. Hmmm… It was around $3 from sparkfun if I recall correctly. Hmm.

  3. In LA » Blog Archive » The Bluetooth Car Audio Streaming Conundrum Says:

    […] via its micro-USB port, but can run while so connected. That was the deal breaker for the similar BCK-08, a device with which I experimented a few years […]

Leave a Reply