Geeky

The brief first flight and untimely end of my quadcopter

Thursday, January 3rd, 2013

Perhaps that title is a bit dramatic. As best I can tell, one of the engines is bad, shut down in flight, and then its pylon snapped free from the wing. The copter/plane is all patched back together now, and will be ready to fly again as soon as I receive a new motor and two replacement propellers.

Video was captured using a GoPro camera mounted to the Quadshot Mocha multicopter’s built-in tripod mount, and an 808 keychain camera #11 with D lens velcro’d to the Gopro (accidentally rotated to the vertical).

More to come.

test post (new server)

Wednesday, January 2nd, 2013

There’s a new server in town.

I swapped out the used and ancient IBM Thinkpad T41 Centrino laptop that was this server for a used Thinkpad T62 Core 2 Duo laptop. Hopefully there’ll now be more stability and faster page loads.

A collected list of links to Blackmagic’s CEO’s camera shipping updates

Friday, November 16th, 2012

Here’s a table of links to all of Blackmagic CEO Grant Petty’s posts to his company’s forums regarding the Blackmagic Cinema Camera‘s manufacturing delays. Apart from the whole “you’re not getting your camera yet” part, they’re a fun read; the sort of engineering details one gets access to as a backer of a kickstarter project. I found the 11/7 update to be full of particularly interesting details.

9/25/12 Update on Camera Shipments
10/19/12 Camera Shipping Update: 10/19
10/29/12 Camera Shipping Update: 10/29
11/7/12 Camera Shipping Update: 11/7
11/15/12 Camera Shipping Update: 11/15
12/14/12 Camera Shipping Update: 12/14

recent 3d prints: gopro naked housing, panelolu LCD panel housing

Tuesday, November 6th, 2012
3d-printed gopro housing
This naked gopro housing fit perfectly on the various gopro mounts. I need to modify the design to get it to better fit the gopro with Wifi Bacpac attached.
LCD panel and control housing for reprap
LCD panel in progress to control my printrbot+ without a computer.

The dynamic range of the BlackMagic Cinema Camera does not disappoint

Monday, October 29th, 2012

I got my hands on a prototype BlackMagic Cinema Camera for a couple of hours last week. To cut to the chase, I was blown away by the dynamic range recorded by this camera, was impressed by the level of detail in the images, and I didn’t find the super-16 sized sensor to be nearly as much of a limitation as I’d expected. Using great Canon EF-mount lenses I already own, I was able to execute the kind of images I wanted, and at better quality than the video from any DSLR.

If you haven’t yet heard of the BlackMagic Cinema Camera (henceforth BMCC) and you are a filmmaker, it’s time for you to read up on it, watch a review, and view a great comparison between the BMCC and the Canon 5D mark III DSLR. As long as BlackMagic manages to ship the BMCC in bulk, people will be making tons of very good looking low-budget films using this camera, and it’s going to displace many DSLRs and prosumer camcorders. The image quality for the price is unmatched.

Did I mention dynamic range? Here’s a still frame from a clip shot at the latter end of dusk. The camera was set to its minimum ASA setting of 200, which explains why the initial image looks very dark. Because The BlackMagic Cinema Camera records each 2.5K frame of video as an individual 5Mb 12-bit raw file, and because its sensor captures a staggering 13-stops of dynamic range, there is much information in the shadows (and highlights) of the image that can be revealed when adjusting the image. I knew this, but was still amazed to see just how much information was waiting in the shadows. Click the ‘graded’ link below the image, drag the green handle to the left and right, or tap around within the image if on a mobile device, to compare the original image to the graded version.

ungraded bank
graded bank

Here’s another still, from a clip shot slightly earlier in the evening. It initially looked unsalvageably dark, which is pretty close to how it looked to the naked eye in real life. I adjusted the image and warmed the color temperature a little bit to see how far I could pull it. The result I’m going to call “night-for-day shooting”! (again, click the ‘graded’ link or drag the handle to compare the original and processed image).

ungraded police car
graded police car

One more before-after comparison; I do prefer the stark, silhouetted look of this as shot, and our model Erik really knows how to create drama when striking a pose –but if it were part of a scene in a film in which the actor’s facial expression was important, it’d be nice if there were detail in the shadows to bring up. With the BMCC, there is that option.

ungraded EJ
graded EJ

My biggest concern with the BMCC related to its sensor size. I was worried that, in order to shoot a decent medium shot of an actor while throwing the background slightly out of focus, I’d need to back away from the actor so far that the image would take on a distant, flattened, surveillance-ish feel. But this shot reassured me that this wasn’t going to have to be an issue.

00819984.Mov-1
Canon 24-105mm f4L at 24mm (58mm equivalent considering a 2.4x "crop factor"), shot from a few feet away. The shot has the kind of immediacy and presence I was worried would be difficult to achieve on the BMCC’s small sensor, but it wasn’t difficult at all. This shot’s been slightly graded in DaVinci Resolve and output at 1080p resolution, click to see a larger image to wonder at the detail level. I did play with the image a bit, and noted that there was plenty of information in the shadows of the eye sockets, so if this were a crucial shot I could track a couple of "power windows" to the eyes and reduce the darkness of the shadows.

It was great to get a chance to play with this camera and evaluate its potential. It exceeds the hype. We’re going to see good things coming from BMCCs, assuming BlackMagic can get them shipping in bulk soon. And I hope they do, because a couple of days after I shot these tests I sold off a piece of equipment I’d deprecated and pre-ordered my BMCC.

Pink Prints

Friday, September 28th, 2012
Img 1674
The Mars Curiosity Rover, model created by ThePlanetMike (downloaded from here)
Img 1673
Pink Flamingo, model created by makerbot. (downloaded from here>
Img 1677
The flamingo in its rightful place. When my xacto knife arrives I’ll have a better shot at removing the brim from the edges.

As always, click any image to see it at full size.

A Better Quality Black Dynamite print

Sunday, September 2nd, 2012

It’s tough to stop at 1 scaled-down and quickly output print when I know the model is uncommonly highly detailed and capable of better. This is what that same model looks like when printed at .08mm layer height in “robot silver” PLA. It took 6 hours and 31 minutes to print.

 photo of a 3d print of Black Dynamite
 photo of a 3d print of Black Dynamite
 photo of a 3d print of Black Dynamite
L to R: Dynomite. In a hand for scale. With Yoda. Click to see any image embiggened, or check ’em out on in my 3d printing set on flickr, which will probably load more quickly.

Black Dynamite and Hagafen Wine make for a nice pairing

Saturday, September 1st, 2012

It seemed the right thing to bring for lunch…

Img 1632 - Version 2

It’s this model from thingiverse, printed at 70% scale in “robot silver” PLA from faberdashery.

an inexpensive way to prevent keyboard marks on your laptop’s screen

Wednesday, August 29th, 2012
Img 1583
Those are not left-facing buddhist 1 swastikas all over the cloth; They’re capital “U” letters arranged in a design pattern likely meant to be void of meaning.
Regardless how frequently you wash your hands, they’re covered in oils and acids that move from your fingertips to your keyboard as you type. This wouldn’t be a problem, except that these deposits are corrosive, and the keys of laptop keyboards often come in contact with the screen when the laptop is in a closed position. Eventually, these deposits will eat through the screen’s coatings, causing marks on the screen that can’t be washed away.

Grab your laptop and aim an edge of it towards a light or window and check the reflections on the surface of the screen to see if you can spot a series of little vertical-notch-shaped marks. If you see them, try to clean them off with a microfiber cloth and some screen cleaning fluid –maybe you can get rid of the acid in time. I had no such luck with my old MacBook Pro and the marks were permanent by the time I’d spotted them. If you’re also out of luck, a google search for keyboard marks on laptop screen will return many related tales of woe that you can read as a way to indirectly commiserate with the zeitgeist.

There’s a simple way to keep these marks from occurring — a piece of microfiber cloth can be placed between the keyboard and screen, can stay in place when the laptop is closed, and acts as a barrier between the keyboard and the screen. It can also be used to safely wipe the screen, clean other monitors, one’s spectacles, etc. I’ve been through a few commercially-made versions of this same product, each purchased at lower cost than the last, and I thought it might be useful to document this race to the bottom.

When my MacBook Pro showed signs of those keyboard marks, I purchased a thick microfiber pad called a ScreenSaverz which totaled about $22 including shipping. The ScreenSaverz worked great, I used that cloth for years without fail.

When I bought my 11.6″ MacBook Air, I needed a microfiber cloth sized for it. I found Shaggymac’s MacBook Screen Protector, which can be had for about $13 shipped to CA. I think the ScreenSaverz cloth may have been slightly thicker and more plush, but the ShaggyMac product fulfilled the same functions for me very well –until I misplaced it.

I figured if I ordered a new fancy screen protector cloth, I’d probably find the lost item a day later and feel like a tool for having purchased two. So I decided to instead see how cheap an adequate replacement I could find. A bit of searching on Amazon turned up the “Human Toolz 3-in-1 Notebook Pad” in “Designer Black” for $6 with prime shipping. It seemed worth a try.

I’ve been using this pad now for a month, and it’s working fine as a protective barrier between keyboard and screen. It’s a different kind of cloth than the others –one side is textured rubber and the other side is a thin and shiny-ish microfiber cloth. It does not wrinkle or bunch up, it’s more like a very thin mousepad. As a screen or glasses wipe it falls short of its predecessors, but it does actually work as a mousepad, and fits the laptop well. I’m liking it so far, and will put the money saved towards building an operant conditioning chamber in which to train myself to never again lose a screen protector cloth.

  1. The Nazi ones went the other way ↩︎

0.1mm layer height… vs .06mm layer height battle!

Monday, August 20th, 2012

Y’all Yoda’d-out yet? Hope not, because Yoda!

 P5A3317
Yoda Lite at 0.06mm layer height. The fringing on his left ear and the hole at the top of the head were also present on the 0.1mm print. One day when I’ve got another extruder printing support material these problems will go away. It’s impressive to me that overhangs like the left ear actually print in the first place.

Now that I’ve replaced the power supply and wound the spool of filament so that it feeds reliably, I can actually trust the Printrbot+ to run without nearly so much babysitting as before. It’s a semi-reliable appliance that ran fine all weekend, printing various objects and tests. Last week I was very satisfied to have gotten good prints at .2mm layer height, but then my brother-in-law mentioned that Ultimakers (arguably the best of the reprap-derived 3D printers) are often used to make nice prints at .1mm layer height. That sounded like a very worthy goal.

After a bunch of testing and tweaking (lowered the “XY jerk” setting in the marlin firmware, lowered the hot end temp to 222ºC, raised the bed temp to 110ºC, increased filament retraction to 1.5mm) I got the bot printing .1mm layers with 180mm/sec perimeters, and proceeded to print a full-scale Yoda Lite as a test –this time completely hollow to save time and plastic. I was shocked to see in this print facial details that were not at all visible in the .2mm layer-height version. Night and day. He has eyes, and eyelids, with wrinkles! It almost looked like there was skin surface. 0.1mm layers are so small they begin to disappear.

But if it could print at 0.1mm, what about lower? How about the arbitrarily-chosen height of 0.06mm? Apparently yes, it’s possible. It worked. The layers are so barely-there that other very fine layers that run vertically and wrap around the contours of the object have become visible –I think they may be evidence of the limits of the resolution of the x and y axes.

Yoda at .1mm layer height
0.1mm layer height. Click any image in this post to see it at full resolution (caveat: some of these are very big and may take a while to load).
Yoda at .06mm layer height.
0.06mm layer height. Yoda’s robes look smoother to me than they do in the .1mm photo.

I’d given away the 0.1mm Yoda to a cousin and can’t compare the two directly, but I had taken a couple of very similar photos, and after adjusting their levels to bring out the detail the .1mm and .06mm version look pretty similar. Click either photo to view at full resolution. I should probably just print another .1mm Yoda so I can compare them with my own eyes and see whether it’s worth printing at below .1mm layer height.

In any case, there are plenty of areas of improvement in all of these prints, but I’m very happy with the progress of my bot’s print quality. Fun.

 Yoda Lite at .1mm layer height
Yoda Lite at 0.1mm layer height, edge-lit to show more detail in the layers than is noticeable at a casual glance. The ears always seem to be a problem with this model since there’s no support material and they stick out at a jaunty angle.