Media

The dynamic range of the BlackMagic Cinema Camera does not disappoint

Monday, October 29th, 2012

I got my hands on a prototype BlackMagic Cinema Camera for a couple of hours last week. To cut to the chase, I was blown away by the dynamic range recorded by this camera, was impressed by the level of detail in the images, and I didn’t find the super-16 sized sensor to be nearly as much of a limitation as I’d expected. Using great Canon EF-mount lenses I already own, I was able to execute the kind of images I wanted, and at better quality than the video from any DSLR.

If you haven’t yet heard of the BlackMagic Cinema Camera (henceforth BMCC) and you are a filmmaker, it’s time for you to read up on it, watch a review, and view a great comparison between the BMCC and the Canon 5D mark III DSLR. As long as BlackMagic manages to ship the BMCC in bulk, people will be making tons of very good looking low-budget films using this camera, and it’s going to displace many DSLRs and prosumer camcorders. The image quality for the price is unmatched.

Did I mention dynamic range? Here’s a still frame from a clip shot at the latter end of dusk. The camera was set to its minimum ASA setting of 200, which explains why the initial image looks very dark. Because The BlackMagic Cinema Camera records each 2.5K frame of video as an individual 5Mb 12-bit raw file, and because its sensor captures a staggering 13-stops of dynamic range, there is much information in the shadows (and highlights) of the image that can be revealed when adjusting the image. I knew this, but was still amazed to see just how much information was waiting in the shadows. Click the ‘graded’ link below the image, drag the green handle to the left and right, or tap around within the image if on a mobile device, to compare the original image to the graded version.

ungraded bank
graded bank

Here’s another still, from a clip shot slightly earlier in the evening. It initially looked unsalvageably dark, which is pretty close to how it looked to the naked eye in real life. I adjusted the image and warmed the color temperature a little bit to see how far I could pull it. The result I’m going to call “night-for-day shooting”! (again, click the ‘graded’ link or drag the handle to compare the original and processed image).

ungraded police car
graded police car

One more before-after comparison; I do prefer the stark, silhouetted look of this as shot, and our model Erik really knows how to create drama when striking a pose –but if it were part of a scene in a film in which the actor’s facial expression was important, it’d be nice if there were detail in the shadows to bring up. With the BMCC, there is that option.

ungraded EJ
graded EJ

My biggest concern with the BMCC related to its sensor size. I was worried that, in order to shoot a decent medium shot of an actor while throwing the background slightly out of focus, I’d need to back away from the actor so far that the image would take on a distant, flattened, surveillance-ish feel. But this shot reassured me that this wasn’t going to have to be an issue.

00819984.Mov-1
Canon 24-105mm f4L at 24mm (58mm equivalent considering a 2.4x "crop factor"), shot from a few feet away. The shot has the kind of immediacy and presence I was worried would be difficult to achieve on the BMCC’s small sensor, but it wasn’t difficult at all. This shot’s been slightly graded in DaVinci Resolve and output at 1080p resolution, click to see a larger image to wonder at the detail level. I did play with the image a bit, and noted that there was plenty of information in the shadows of the eye sockets, so if this were a crucial shot I could track a couple of "power windows" to the eyes and reduce the darkness of the shadows.

It was great to get a chance to play with this camera and evaluate its potential. It exceeds the hype. We’re going to see good things coming from BMCCs, assuming BlackMagic can get them shipping in bulk soon. And I hope they do, because a couple of days after I shot these tests I sold off a piece of equipment I’d deprecated and pre-ordered my BMCC.

Turkish cover Super Mario Bros theme wins the internet

Thursday, October 4th, 2012

This video makes me so happy:

0.1mm layer height… vs .06mm layer height battle!

Monday, August 20th, 2012

Y’all Yoda’d-out yet? Hope not, because Yoda!

 P5A3317
Yoda Lite at 0.06mm layer height. The fringing on his left ear and the hole at the top of the head were also present on the 0.1mm print. One day when I’ve got another extruder printing support material these problems will go away. It’s impressive to me that overhangs like the left ear actually print in the first place.

Now that I’ve replaced the power supply and wound the spool of filament so that it feeds reliably, I can actually trust the Printrbot+ to run without nearly so much babysitting as before. It’s a semi-reliable appliance that ran fine all weekend, printing various objects and tests. Last week I was very satisfied to have gotten good prints at .2mm layer height, but then my brother-in-law mentioned that Ultimakers (arguably the best of the reprap-derived 3D printers) are often used to make nice prints at .1mm layer height. That sounded like a very worthy goal.

After a bunch of testing and tweaking (lowered the “XY jerk” setting in the marlin firmware, lowered the hot end temp to 222ºC, raised the bed temp to 110ºC, increased filament retraction to 1.5mm) I got the bot printing .1mm layers with 180mm/sec perimeters, and proceeded to print a full-scale Yoda Lite as a test –this time completely hollow to save time and plastic. I was shocked to see in this print facial details that were not at all visible in the .2mm layer-height version. Night and day. He has eyes, and eyelids, with wrinkles! It almost looked like there was skin surface. 0.1mm layers are so small they begin to disappear.

But if it could print at 0.1mm, what about lower? How about the arbitrarily-chosen height of 0.06mm? Apparently yes, it’s possible. It worked. The layers are so barely-there that other very fine layers that run vertically and wrap around the contours of the object have become visible –I think they may be evidence of the limits of the resolution of the x and y axes.

Yoda at .1mm layer height
0.1mm layer height. Click any image in this post to see it at full resolution (caveat: some of these are very big and may take a while to load).
Yoda at .06mm layer height.
0.06mm layer height. Yoda’s robes look smoother to me than they do in the .1mm photo.

I’d given away the 0.1mm Yoda to a cousin and can’t compare the two directly, but I had taken a couple of very similar photos, and after adjusting their levels to bring out the detail the .1mm and .06mm version look pretty similar. Click either photo to view at full resolution. I should probably just print another .1mm Yoda so I can compare them with my own eyes and see whether it’s worth printing at below .1mm layer height.

In any case, there are plenty of areas of improvement in all of these prints, but I’m very happy with the progress of my bot’s print quality. Fun.

 Yoda Lite at .1mm layer height
Yoda Lite at 0.1mm layer height, edge-lit to show more detail in the layers than is noticeable at a casual glance. The ears always seem to be a problem with this model since there’s no support material and they stick out at a jaunty angle.

Printing Yoda, The Video

Wednesday, August 15th, 2012

During the 2+ hours it took to print the full-scale Yoda Lite at .2mm layer height the other day, I decided to power up the DSLR and LED light, and document the process. The result is this short video which includes many handheld macro shots of my Printrbot+ in action.

The music is Kenichi ÅŒkuma’s track for the Flat Zone 2 level of the Wii game Super Smash Bros. Brawl; A gratingly blippy tune 1 that evokes 60s-era space age lounge. I wouldn’t normally use commercial music, but as far as I can tell this track is unavailable for purchase (at least in the USA), and it deserves some exposure outside of the 4-year-old video game for which it was composed.

  1. I use the word “grating” with much love, I admire the way the otherwise unpleasant beeps form a catchy tune. ↩︎

My first blob (and some better blobs)

Friday, August 3rd, 2012

A blob meant to be a clip to hold a piece of glass on the printbed.
The first somewhat-recognizable blob I printed, a rather squishy version of technoswiss’s printrbot glass clip.

On Sunday, I made a few last-minute adjustments to the Printrbot+, wired the motors and sensors to its circuit board, loaded the software on my computer, powered it up, plugged in the USB cable, and gave it a whirl. Shockingly, the blue smoke remained inside the board and all axes and the extruder responded to computer control.

I applied some blue painter’s masking tape directly to the print bed as a surface, loaded up the extruder, and set it printing technoswiss’s ‘Printrbot glass clips’ so that I could install the 8×8″ sheet of borosilicate glass I’d purchased from McMaster Carr to use as a print bed. The extruded plastic would not stick to the tape. I increased the heat of the bed and extruder and had some success, but eventually gave up on that print surface and applied a surface of heat-resistant Kapton material to the print bed. That worked much better, and produced the squishy version of the clip visible above.

a much improved print
At left, the first print. At right, a better print of the same object after some calibration. The countersunk hole for the bolt can be seen.

Monday’s subsequent attempts at printing didn’t stick to the Kapton, and I realized that I needed to recalibrate the Z-axis and attempt to level the bed, as the hot end of the extruder was just not getting close enough (it’s supposed to print from a distance roughly equal to the thickness of a piece of paper). Problem solved, but as it printed I noticed that the printhead was squishing the printed object around as if it were a block of cheese. I reasoned that this was due to excessive bed temperature, excessive hot-end temperature, a miscalibrated z-axis (the head was not raising enough between layers), and a miscalibrated extruder (it was extruding too much plastic). A few measurements and adjustments later, and a much better print was produced. It seemed like it would be usable, so I printed 3 more.

Img 1543

And then it seemed time to print some replacement parts before the bits that had broken in assembley stopped working. I’d split the y-axis pulley by over tightening and had also broken a y-axis belt clip. I downloaded the files and tried printing these more complicated parts. Unfortunately at this point the broken y-pulley was beginning to slip on the motor shaft, so the y-axis was not stable. The pulley is probably not going to be usable, but it does look cool. The belt clip is slanted due to the slipping y-axis, but it’ll probably work fine. I have more precise GT2 belts and pulleys on order, so it should be printing much more accurately by next week.

The total results of my first couple of days of printing with the Printrbot+.
The total results of my first couple of days of printing with the Printrbot+.

Freak sale on Ferris Bueller’s Day Off – Blu Ray at Amazon

Thursday, August 2nd, 2012

 Images I 51Ehq8Avo6L. Sl215

Amazon.com is selling Ferris Bueller’s Day Off on Blu-ray for $7.99 right now. A great, free-spirited, John Hughes film.

That price drop happened today, who knows how long it’ll last. If you haven’t seen the film, now’s your chance to do so for less than the price of a time machine and a 1986 cinema ticket. Wow, has it really been that long since Cameron was in Egypt land?

The Man with the Iron Fists – red band trailer

Friday, June 29th, 2012
It’s here! Finally y’all can get a peek at the film I (and a ton of other people) worked on for the last year-and-a-half:

The secret is out 1.

  1. and it looks much nicer in HD on youtube than in this embedded version (though it’s still a veritable stress test for the h264 codec). So for the best viewing experience I’d say go there and click the resolution at the lower-right of that viewer to set it to 720p HD ↩︎

Spot the problem in Buster Keaton’s clock

Saturday, May 19th, 2012


Hint: The problem’s in the lower-right quadrant of the clock face.

Location:Winona Ave,Burbank,United States

Excellent British TV series available on Netflix streaming

Wednesday, May 16th, 2012
[netflix:70217140:img:true:end]
hover over the ‘play’ button to reveal the ‘add to instant’ button

I’m delighted to report that all seven seasons of the fantastic British sitcom “Peep Show” are available to watch on Netflix streaming. If you enjoy Curb Your Enthusiasm but are ready for humor that goes even further into matters crass and uncomfortable, prepare yourself for the travails of flatmates Mark and Jeremy. A groundbreaking and aptly-titled show, in which every shot is what’s known as a P.O.V.

[netflix: 70202589:img:true:end]

The first episode I came across was series 5 episode 2, entitled Spin War –it may act as a bit of a spoiler to skip ahead, but that episode is a great place to start. You can always go back to the first series, secure in the knowledge that the show just gets better in successive seasons. Shows are under a half-hour in duration, so it’s easy to fit them in.

Another British series worth a look is the BBC’s latest adaptation of Sherlock Holmes. Besides giving in to some low-rent flashiness, this show’s a lot of fun and is very well done. The leads are perfectly cast, with an excitable and eccentric Benedict Cumberbatch in the title role. For some reason he (as Holmes) keeps reminding me of Zachary Quinto, so it’ll be fun (or confusing) to watch those two interact in the next Star Trek film (they fight in this “leaked” set video).

Miller’s Crossing is finally on Blu-ray

Monday, May 7th, 2012
Vlcsnap-2010-04-29-17H20M08S114

Miller’s Crossing is finally available on Blu-ray. I’ve been waiting for this for a long time. Actually, it looks like it was released last August, but it slipped under my radar. That Blu-ray alone is around $18, but it’s also available as part of a very-incomplete Coen Brothers Collection box set with Blood Simple, Fargo, and Raising Arizona for $25.

Done.