Yoda Lives

Yoda printed on Printrbot+
Yoda printed on Printrbot+
Click either image to see it embiggened.

I made time to print a 100% scale version of Yoda Lite tonight with my Printrbot+ set to .2mm layer height. Catastrophe struck in the form of a power supply reset right in the middle of printing, but a tip on this page led me to edit the raw gcode of the file such that when I reopened it in macpronterface the print continued almost exactly where it left off, saving me the need to start over and lose over an hour of printing. A slight horizontal line running across just below Yoda’s nose is the only sign of this print issue.

Leave a Reply